Description
The Orbital Shaker may be used for several applications including culturing microbes, washing blots, and general mixing. A spring platform is an available accessory which can handle multiple flasks. CTI’s SlientShaker® is designed and built for a heavy workload, and provides continues shaking with no vibration or heat output. The SlientShaker® can be placed into a standard incubator, converting the incubator into a shaking incubator.
Features
Digital control and LED display.
Low noise level.
Gentle speed up and slow down.
Automatic recovery from power outage.
Includes standard platform with non-skid mat.

SONOSHAKE® – Ultrasonic bath SONOREX DIGITEC DT 1028 F combined with
shaking device SA 1028
SONOSHAKE offers a wide range of possible applications for sample preparation
in many areas of analysis, for example, in environmental and foodstuffs
analytics as well as in the area of medical diagnostics.
The bath has a basic area of 500 mm x 300 mm and a tank depth of only 65 mm,
making it ideal for sonication of samples in laboratory ? asks.
The samples can be sonicated either for a selected period or in continuous
mode. Quick degassing using the DEGAS function is also possible.
With four different shaking frequencies, the shaking device enables gentle to
vigorous reciprocating motion up to a maximum of 20 mm.
Both procedures can be carried out simultaneously or separately.
This means that, for example, a sample can be pre-homogenized at a speci? ed
shaking frequency, and then ? nal homogenization can be achieved in a very
short time using ultrasound.
Shaking device SA 1028
????analogue setting of time (1 – 15 min or continuous) and shaking frequency
????reciprocating motion: settings in 4 steps possible of up to 200 rpm
????constant amplitude of 20 mm independently of loading
????rack easy to remove
????easy mounting of the laboratory clamps EK 10 –250 (ordering separately)
????shaking platform approx. 410 x 280 mm (l × w)
????mounting of 36 × 10-ml-? asks or 36 × 25-ml-? asks or 18 × 50-ml-? asks or
12 × 100-ml-? asks or 10 × 250-ml-Kolben
????required ? oor space of SONOSHAKE approx. 850 x 360 mm (l × w)
The shaking device SA 1028 can also be added to existing
SONOREX DIGITEC DT 1028 F ultrasonic baths.

The Panasonic MIR-S100 orbital shaker delivers superior performance and functions in a compact, low-vibration design.

Low vibration, low noise
Compact design, intelligent operation
Easy installation in Panasonic incubator or growth chamber
High-speed shaking - The MIR-S100 offers high-speed shaking from 50 to 500 rpm, which significantly reduces waiting time for cultures.

Easy operation with MIR/MLR models - Can be installed in the MIR-154/254/553 and MLR-351. Control panel located in center of unit enables checking of indicators through the window of the MIR/MLR.

Soft start - Gradually accelerates until reaching the preset number of revolutions so that samples inside flasks and test tubes are not spilled or foamed. Three levels of acceleration speed can be selected.

Timer - Indicates time of operation from 0 to 99.9 hours in increments of 0.1 hour (6 minutes).

Integrated operating time display - Displays the integrated operating time (which can be checked in the function mode).

Key lock - Locks the keys on the control panel to avoid accidental function selection.

Description
The 3D nutating shaker product is an economical mini 3D shaker for mixing samples with the combined motions of an orbital shaker and a rocker. This provides a gentle yet thorough mixing of the sample.
Features
Small footprint and an elegant design.
3D motion generates thorough and gentle mixing.
Dimpled non-skid mat holds tubes firmly in place.
Specification
Speed 20rpm Platform Dimensions 260×260mm
Tilt Angle 20° Dimensions 260×260×190mm
Max. Load 0.8Kg Power 20W
Ambient Temperature 5?~40? Power Supply AC100V/60Hz(US)
AC220V/50Hz(Eur)
Relative Humidity ?80% Weight 1.8Kg