Structure : the ice maker is compound in 2 different
modules, the ice making machine and the storage bin. Both
the modules are realized completely in stainless steel 18/10
AISI 304. The bin is insulated to limit the melting of the ice
stored and it is provided with a special sensor that signal
when this bin is full, and consequently stops the machine
itself to produce ice
• Feet : Nr 4 made in stainless steel 18/10 AISI 304,
adjustable in height for levelling
• Door : in the front part of the appliance is located the door
plastic made that closes the storage bin
• Water inlet and outlet : both located in the rear part of the
appliance. The water inlet is 3/4” size, while the water outlet
is 24 mm ?. Both the pipes for the water inlet and outlet are
included in the machine, the one for the inlet is about 100 cm
long, while the outlet is about 40 cm
• Kind of ice : flake
• Production (Kg/24h) : 250
• Bin capacity (Kg) : 200
• Cooling unit : incorporated into the ice making machine
module, with the condensing unit compounded by Nr 1
hermetic compressor and Nr 1 finned condenser, air cooled
through a fan, in the version “A” or Nr 1 condenser, water
cooled, in the version “W”. Also, the motor compartment,
incorporates the special evaporator with the screw with no
end that crush the ice once formed, and automatically
release it into the storage bin. All the mounted components
are industrial grade to grant the maximum reliability
• Water consumption (litres/Kg) : 1 (version A), 5,2 (version
W)
• Refrigerant : R404a CFC-free
• Voltage (V/ph/Hz) : 220-230/1/50
• Breakers : Nr 1 glass cartridge fuse with a rating of 10A, at
protection of the appliance
• Noise level (dB(A)) : ? 52
• Dimensions (W x D x H cm) : 87 x 79 x 170
• Net weight (Kg) : 160
• Packed dimensions (W x D x H cm) : ICE MAKER : 70 x 54 x 94 (0,36 m³)
: STORAGE BIN : 92 x 84 x 121 (0,94 m³)
• Gross weight (Kg) : 1

Structure : completely realized in stainless steel 18/10 AISI 304.
Inside, the structure it includes a bin, realized in atoxic plastic
material, where is stored the ice, when this bin is full, the machine
stop itself to produce ice. The bin is also insulated, to avoid the
melting of the ice stored
• Feet : Nr 4 made in plastic material, adjustable in height for levelling
• Door : in the front part of the appliance is located the door plastic
made that closes the storage bin
• Water inlet and outlet : both located in the rear part of the
appliance. The water inlet is 3/4” size, while the water outlet is 24
mm ?. Both the pipes for the water inlet and outlet are included in
the machine, the one for the inlet is about 100 cm long, while the
outlet is about 50 cm
• Kind of ice : flake
• Production (Kg/24h) : 150
• Bin capacity (Kg) : 55
• Cooling unit : bottom mounted, with the condensing unit
compounded by Nr 1 hermetic compressor and Nr 1 finned
condenser, air cooled through a fan, in the version “A” or Nr 1
condenser, water cooled, in the version “W”. Also, the motor
compartment, incorporates the special evaporator with the screw
with no end that crush the ice once formed, and automatically
release it into the storage bin. All the mounted components are
industrial grade to grant the maximum reliability
• Water consumption (litres/Kg) : 1 (version A), 6,4 (version W)
• Refrigerant : R404a CFC-free
• Voltage (V/ph/Hz) : 220-230/1/50
• Breakers : Nr 1 glass cartridge fuse with a rating of 10A, at protection of the appliance
• Noise level (dB(A)) : ? 50
• Dimensions (W x D x H cm) : 74 x 69 x 115
• Net weight (Kg) : 95
• Packed dimensions (W x D x H cm) : 78 x 74 x 119 (0,69 m³)
• Gross weight (Kg) : 105

Structure : completely realized in stainless steel 18/10 AISI 304.
Inside, the structure it includes a bin, realized in atoxic plastic
material, where is stored the ice, when this bin is full, the machine
stop itself to produce ice. The bin is also insulated, to avoid the
melting of the ice stored
• Feet : Nr 4 made in plastic material, adjustable in height for
levelling
• Door : in the front part of the appliance is located the door plastic
made that closes the storage bin
• Water inlet and outlet : both located in the rear part of the
appliance. The water inlet is 3/4” size, while the water outlet is 24
mm ?. Both the pipes for the water inlet and outlet are included in
the machine, the one for the inlet is about 100 cm long, while the
outlet is about 50 cm
• Kind of ice : flake
• Production (Kg/24h) : 150
• Bin capacity (Kg) : 40
• Cooling unit : bottom mounted, with the condensing unit
compounded by Nr 1 hermetic compressor and Nr 1 finned
condenser, air cooled through a fan, in the version “A” or Nr 1
condenser, water cooled, in the version “W”. Also, the motor
compartment, incorporates the special evaporator with the screw
with no end that crush the ice once formed, and automatically
release it into the storage bin. All the mounted components are
industrial grade to grant the maximum reliability
• Water consumption (litres/Kg) : 1 (version A), 6,4 (version W)
• Refrigerant : R404a CFC-free
• Voltage (V/ph/Hz) : 220-230/1/50
• Breakers : Nr 1 glass cartridge fuse with a rating of 10A, at protection of the appliance
• Noise level (dB(A)) : ? 50
• Dimensions (W x D x H cm) : 74 x 69 x 105
• Net weight (Kg) : 85
• Packed dimensions (W x D x H cm) : 78 x 74 x 109 (0,63 m³)
• Gross weight (Kg) : 95

Structure : completely realized in stainless steel 18/10 AISI 304.
Inside, the structure it includes a bin, realized in atoxic plastic material,
where is stored the ice, when this bin is full, the machine stop itself to
produce ice. The bin is also insulated, to avoid the melting of the ice
stored
• Feet : Nr 4 made in plastic material, adjustable in height for levelling
• Door : in the front part of the appliance is located the door plastic made
that closes the storage bin
• Water inlet and outlet : both located in the rear part of the appliance.
The water inlet is 3/4” size, while the water outlet is 24 mm ?. Both the
pipes for the water inlet and outlet are included in the machine, the one
for the inlet is about 100 cm long, while the outlet is about 50 cm
• Kind of ice : flake
• Production (Kg/24h) : 90
• Bin capacity (Kg) : 30
• Cooling unit : bottom mounted, with the condensing unit compounded
by Nr 1 hermetic compressor and Nr 1 finned condenser, air cooled
through a fan, in the version “A” or Nr 1 condenser, water cooled, in the
version “W”. Also, the motor compartment, incorporates the special
evaporator with the screw with no end that crush the ice once formed,
and automatically release it into the storage bin. All the mounted
components are industrial grade to grant the maximum reliability
• Water consumption (litres/Kg) : 1 (version A), 6,3 (version W)
• Refrigerant : R404a CFC-free
• Voltage (V/ph/Hz) : 220-230/1/50
• Breakers : Nr 1 glass cartridge fuse with a rating of 10A, at protection of the appliance
• Noise level (dB(A)) : ? 50
• Dimensions (W x D x H cm) : 50 x 66 x 93
• Net weight (Kg) : 70
• Packed dimensions (W x D x H cm) : 55 x 72 x 99 (0,40 m³)

Structure : completely realized in stainless steel 18/10 AISI 304.
Inside, the structure it includes a bin, realized in atoxic plastic material,
where is stored the ice, when this bin is full, the machine stop itself to
produce ice. The bin is also insulated, to avoid the melting of the ice
stored
• Feet : Nr 4 made in plastic material, adjustable in height for levelling
• Door : in the front part of the appliance is located the door plastic
made that closes the storage bin
• Water inlet and outlet : both located in the rear part of the appliance.
The water inlet is 3/4” size, while the water outlet is 24 mm ?. Both the
pipes for the water inlet and outlet are included in the machine, the
one for the inlet is about 100 cm long, while the outlet is about 50 cm
• Kind of ice : flake
• Production (Kg/24h) : 90
• Bin capacity (Kg) : 20
• Cooling unit : bottom mounted, with the condensing unit compounded
by Nr 1 hermetic compressor and Nr 1 finned condenser, air cooled
through a fan, in the version “A” or Nr 1 condenser, water cooled, in
the version “W”. Also, the motor compartment, incorporates the special
evaporator with the screw with no end that crush the ice once formed,
and automatically release it into the storage bin. All the mounted
components are industrial grade to grant the maximum reliability
• Water consumption (litres/Kg) : 1 (version A), 6,3 (version W)
• Refrigerant : R404a CFC-free
• Voltage (V/ph/Hz) : 220-230/1/50
• Breakers : Nr 1 glass cartridge fuse with a rating of 10A, at protection of the appliance
• Noise level (dB(A)) : ? 50
• Dimensions (W x D x H cm) : 50 x 66 x 82
• Net weight (Kg) : 60
• Packed dimensions (W x D x H cm) : 55 x 71 x 88 (0,35 m³)
• Gross weight (Kg) : 70

External Dimensions (W x D x H) cm 56 x 86,5 x 170
Structure and Insulation stainless steel inside and outside
Height adjustable Feet
Kind of ice flakes
Motor cooling air
Production Kg/24h 288
Bin capacity (kg) 166

Technical data
Details
In accordance with 2006/95/CE, 2004/108/CE and following modifications
Package Strong Cardboard on wooden pallet

Structure : completely realized in stainless steel 18/10 AISI 304.
Inside, the structure it includes a bin, realized in atoxic plastic
material, where is stored the ice, when this bin is full, the machine
stop itself to produce ice. The bin is also insulated, to avoid the
melting of the ice stored
• Feet : Nr 4 made in plastic material, adjustable in height for
levelling
• Door : in the front part of the appliance is located the door plastic
made that closes the storage bin
• Water inlet and outlet : both located in the rear part of the
appliance. The water inlet is 3/4” size, while the water outlet is 24
mm ?. Both the pipes for the water inlet and outlet are included in
the machine, the one for the inlet is about 100 cm long, while the
outlet is about 50 cm
• Kind of ice : flake
• Production (Kg/24h) : 150
• Bin capacity (Kg) : 40
• Cooling unit : bottom mounted, with the condensing unit
compounded by Nr 1 hermetic compressor and Nr 1 finned
condenser, air cooled through a fan, in the version “A” or Nr 1
condenser, water cooled, in the version “W”. Also, the motor
compartment, incorporates the special evaporator with the screw
with no end that crush the ice once formed, and automatically
release it into the storage bin. All the mounted components are
industrial grade to grant the maximum reliability
• Water consumption (litres/Kg) : 1 (version A), 6,4 (version W)
• Refrigerant : R404a CFC-free
• Voltage (V/ph/Hz) : 220-230/1/50
• Breakers : Nr 1 glass cartridge fuse with a rating of 10A, at protection of the appliance
• Noise level (dB(A)) : ? 50
• Dimensions (W x D x H cm) : 74 x 69 x 105
• Net weight (Kg) : 85
• Packed dimensions (W x D x H cm) : 78 x 74 x 109 (0,63 m³)
• Gross weight (Kg) : 95

Structure : completely realized in stainless steel 18/10 AISI 304.
Inside, the structure it includes a bin, realized in atoxic plastic material,
where is stored the ice, when this bin is full, the machine stop itself to
produce ice. The bin is also insulated, to avoid the melting of the ice
stored
• Feet : Nr 4 made in plastic material, adjustable in height for levelling
• Door : in the front part of the appliance is located the door plastic made
that closes the storage bin
• Water inlet and outlet : both located in the rear part of the appliance.
The water inlet is 3/4” size, while the water outlet is 24 mm ?. Both the
pipes for the water inlet and outlet are included in the machine, the one
for the inlet is about 100 cm long, while the outlet is about 50 cm
• Kind of ice : flake
• Production (Kg/24h) : 90
• Bin capacity (Kg) : 30
• Cooling unit : bottom mounted, with the condensing unit compounded
by Nr 1 hermetic compressor and Nr 1 finned condenser, air cooled
through a fan, in the version “A” or Nr 1 condenser, water cooled, in the
version “W”. Also, the motor compartment, incorporates the special
evaporator with the screw with no end that crush the ice once formed,
and automatically release it into the storage bin. All the mounted
components are industrial grade to grant the maximum reliability
• Water consumption (litres/Kg) : 1 (version A), 6,3 (version W)
• Refrigerant : R404a CFC-free
• Voltage (V/ph/Hz) : 220-230/1/50
• Breakers : Nr 1 glass cartridge fuse with a rating of 10A, at protection of the appliance
• Noise level (dB(A)) : ? 50
• Dimensions (W x D x H cm) : 50 x 66 x 93
• Net weight (Kg) : 70
• Packed dimensions (W x D x H cm) : 55 x 72 x 99 (0,40 m³)

Structure : completely realized in stainless steel 18/10 AISI 304.
Inside, the structure it includes a bin, realized in atoxic plastic material,
where is stored the ice, when this bin is full, the machine stop itself to
produce ice. The bin is also insulated, to avoid the melting of the ice
stored
• Feet : Nr 4 made in plastic material, adjustable in height for levelling
• Door : in the front part of the appliance is located the door plastic
made that closes the storage bin
• Water inlet and outlet : both located in the rear part of the appliance.
The water inlet is 3/4” size, while the water outlet is 24 mm ?. Both the
pipes for the water inlet and outlet are included in the machine, the
one for the inlet is about 100 cm long, while the outlet is about 50 cm
• Kind of ice : flake
• Production (Kg/24h) : 90
• Bin capacity (Kg) : 20
• Cooling unit : bottom mounted, with the condensing unit compounded
by Nr 1 hermetic compressor and Nr 1 finned condenser, air cooled
through a fan, in the version “A” or Nr 1 condenser, water cooled, in
the version “W”. Also, the motor compartment, incorporates the special
evaporator with the screw with no end that crush the ice once formed,
and automatically release it into the storage bin. All the mounted
components are industrial grade to grant the maximum reliability
• Water consumption (litres/Kg) : 1 (version A), 6,3 (version W)
• Refrigerant : R404a CFC-free
• Voltage (V/ph/Hz) : 220-230/1/50
• Breakers : Nr 1 glass cartridge fuse with a rating of 10A, at protection of the appliance
• Noise level (dB(A)) : ? 50
• Dimensions (W x D x H cm) : 50 x 66 x 82
• Net weight (Kg) : 60
• Packed dimensions (W x D x H cm) : 55 x 71 x 88 (0,35 m³)
• Gross weight (Kg) : 70

External Dimensions (W x D x H) cm 56 x 86,5 x 170
Structure and Insulation stainless steel inside and outside
Height adjustable Feet
Kind of ice flakes
Motor cooling air
Production Kg/24h 288
Bin capacity (kg) 166

Technical data
Details
In accordance with 2006/95/CE, 2004/108/CE and following modifications
Package Strong Cardboard on wooden pallet